Removal Of The Side Covers - Ducati Monster 796 Workshop Manual

Cylinder head assemblies: camshafts
Operations
Refit the throttle body
Connect the throttle cable
Refit the airbox
Refit the ABS control unit
Reconnect the HT leads
Connect the starter motor/solenoid
cable
Connect ECU connector to main
wiring harness
Refit the battery support
Refit the battery
Refit the fuel tank
Refit the tank covers
Refit the seat

Removal of the side covers

Operations
Remove the seat
Remove the tank covers
Remove the fuel tank
Remove the horizontal cylinder
exhaust pipe
Remove the side timing belt covers 9 - 4.2,
Remove the timing belts and
camshaft timing belt pulleys on the
heads
Note
For clarity, the figures show the cylinder head removed from engine.
Remove the retaining screws (18) and (1) and remove the cover (2) from the vertical cylinder head (10).
Section reference
8 - 6, Refitting the throttle body
7 - 8.1, Refitting the throttle
twistgrip
8 - 7, Refitting the airbox
7 - 6, Refitting the ABS control unit
6 - 12, Spark plug
6 - 3, Refitting the starter motor
6 - 12, Refitting the electronic
control unit
6 - 2, Battery support
6 - 2, Refitting the battery
8 - 2, Refitting the fuel tank
5 - 2, Refitting the fuel tank
fairings
5 - 3, Refitting the seat
Section reference
5 - 3, Removal of the seat
5 - 2, Removal of the fuel tank
fairings
8 - 2, Removal of the fuel tank
8 - 8, Removal of the exhaust
system
Removal of the timing belt
covers
9 - 4.2, Removal of the timing
system assembly