Removal-Refitting Of The Engine Assembly; Removal Of The Engine - Ducati Monster 796 Workshop Manual

Removal–refitting of the engine assembly
1 -Removal–refitting of the engine assembly
1 Engine
2 Bolt
3 Nut
4 Complete frame assembly
5 Swingarm pivot
Spare parts catalogue
796
FRAME
796
SWINGARM
796 ABS
FRAME
796 ABS
SWINGARM
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in
the exploded view diagram.

Removal of the engine

In order to remove engine you must first remove a series of other components from the motorcycle.
Most of these removal procedures are described in the relative sections of this manual.
The following flow chart illustrates the logical sequence in which the parts are to be removed from the motorcycle and a
reference to the section where the removal procedure is described. This section describes only the operations to be carried
out after having removed all the parts listed in the flow chart.
Operations
Remove the seat
Section reference
5 - 3, Removal of the seat