Front and rear mudguard
Removing the rear mudguard
Undo the screws (7), remove the grommet (6) with spacers (10) and then remove the rear mudguard (8) from the
swinging arm.
Refitting the rear mudguard
Set the rear mudguard (8) onto the swinging arm, starting the screws (7) in their thread with the recommended
threadlocker, and fitting, on the front one, the spacer (10) and the grommet (12).
Tighten the screws (7) to a torque of 5 Nm ±10% (Sect. 3 - 3,
Frame torque
settings).