Ducati Monster 796 Workshop Manual page 491

Hide thumbs Also See for Monster 796:

Table of Contents

Exhaust system

Loosen the two nuts (20) and take central exhaust pipe (5) off the mounting bracket for tank and exhaust (E).

Disconnect the two lambda sensors (2) from the main wiring harness (Sect. 6 - 1,

Routing of wiring on

frame). Refer to

Section 6 - 12,

Lambda sensor

for details on lambda sensor.

Unscrew the screw (15) retaining the central exhaust pipe (5) to engine and remove the bottom plate (6).

Unscrew the clamp (16) and separate the centre exhaust pipe (5) from the horizontal cylinder exhaust pipe (3) and the

vertical cylinder exhaust pipe (4).

Chapters

Table of Contents