Table of Contents
Advertisement
Indicating devices
Checking the front and rear brake light switches, neutral light switch, oil pressure switch and clutch switch
Brake light switches
To check operation of the front (1) and rear (2) stop lights use a multimeter to check that when the front or rear brake is
pressed, there is electrical continuity (Pos. A) between the terminals of the corresponding switch (Sect. 6 - 13,
Using a
multimeter to check the electrical
systems, related to operation of the multimeter). When the brake is released, there
must be no electrical continuity across the terminals of the corresponding switch (Pos. B). If these tests fail to produce
positive results, the part in question must be renewed.
Advertisement
Chapters
Table of Contents
