Disassembly Of The Clutch Cover - Ducati Monster 796 Workshop Manual

Clutch assembly: clutch cover
Removal of the clutch cover
Operations
Drain the engine oil
Disconnect the oil pressure
sensor
Unscrew the screws (2), (3) and (5) securing the clutch-side crankcase cover (1).
Tap around the edge of the cover with a plastic mallet to detach it from the crankcase half.
Remove the crankcase cover (1) taking care not to damage the locating bush (13).
Check the condition of the locating bush (13) and replace if deformed.

Disassembly of the clutch cover

Remove the plug (15) from the cover and the relative O-ring (7), the engine oil pressure switch (16) and its seal (14).
Section reference
4 - 3, Changing the engine oil and filter
cartridge
6 - 5, Checking the indicating devices