Table of Contents
Advertisement
Fork - steering head: front fork
Unscrew the top cap (7).
Remove the filler cap assembly (7).
Fit the service tool part no. 88713.0957, engaging its pins (A) in the spring retainer holes, and secure in place with the
screw (B).
Push the tool downwards to compress the spring and then fit the tool spacer (C) under the cartridge lock nut (13).
Apply a wrench to the flats (D) and counterhold the lock nut to loosen the top cap (7).
Remove the cap (7).
Fit service tool part no. 88713.0958 and screw it onto the damper rod.
Advertisement
Chapters
Table of Contents
