Ducati Monster 796 Workshop Manual page 470

Throttle body
Locate the throttle body assembly (26) on the motorcycle.
Fit the clamps (17) on the intake manifolds (11) and orient them as shown in the photos.
Orient the throttle body (26) with the pulley facing the right-hand side (relative to the direction of travel) and insert it
fully into the intake manifolds.
Tighten the clamps (17) to a torque of 1.5 Nm ±10%) (Sect. 3 - 3, Frame torque settings), making sure that they do not
protrude beyond the edges of the manifolds.
Reconnect the wiring connectors (F) to connect the main wiring loom to the injectors (10).