Table of Contents
Advertisement
Clutch assembly: APTC wet clutch
Install the clutch plates (7) in the hub (13) starting with one of the 11 friction plates (F) and alternate with the 10 driven
plates (G).
Install the clutch plate assembly (7) with hub (13) in the drum (10).
Warning
When refitting the clutch centre (10) with the hub (13), align the reference notches (H) and (L).
Insert the three tools 88713.2591 to fix the hub (13) to the clutch centre (10).
Screw in the three tools 88713.2591 by hand, pressing down on the clutch plates with the hub (13), so as to overcome
the resistance of the springs.
Note
Screw in the three tools 88713.2591 to put the clutch plates under a light load.
Advertisement
Chapters
Table of Contents
