Removal Of The Cylinder Head Assembly - Ducati Monster 796 Workshop Manual

Hide thumbs Also See for Monster 796:

Table of Contents

Cylinder head assemblies: valves - rocker arms

Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in

the exploded view diagram.

Removal of the cylinder head assembly

Remove the engine from the

Remove the side timing belt

Remove the timing belts and the

timing belt pulleys

Removal of the cylinder heads

On disassembly of the components mounted on the cylinder head it is essential that they are laid out or marked in such a

way that they can be refitted in exactly the same position they occupied before being removed.

Using tool 88713.2676, unscrew the nuts (19) on the cylinder head studs.

Remove the nuts (19) and recover the special washers (12) positioned between the nuts and the cylinder head.

Remove the head assembly from the engine by lifting it off the engine stud bolts.

Remove the cylinder head gaskets (C).

Removal of the rocker arms, shims and valves

Remove the valve covers

Remove the camshafts

Remove the camshaft end caps

Remove the clip (1) securing the opening rocker (3).

Move the rocker arm (3) to free the valve opening shim (6).

Section reference

Removal of the engine

Removal of the timing belt

Removal of the timing

system assembly

Section reference

Removal of the valve

Removal of the camshafts

Removal of the side covers

Table of Contents