Cylinder head assemblies: camshafts
If removed, reposition clip (A) onto opening rocker arm (B).
Check the condition of the key (15) and its groove, and install it.
Operations
Refit the inner timing belt covers
Refit the timing belt pulleys on the
heads and the timing belts
Refit the timing covers
Refit the horizontal cylinder
exhaust pipe
Refit the fuel tank
Refit the tank covers
Refit the seat
Refitting side covers
Lubricate the new O-rings (19) with the recommended grease and fit on the end cap (20).
Fit the end cap (20) on the left-hand side of the cylinder head.
Section reference
9 - 4.3,
Refitting side covers
9 - 4.2,
Refitting the timing system
assembly
9 - 4.2,
Refitting the timing belt
covers
8 - 8,
Refitting the exhaust system
8 - 2,
Refitting the fuel tank
5 - 2,
Refitting the fuel tank fairings
5 - 3,
Refitting the seat