Ducati Monster 796 Workshop Manual page 422

Stands
Loosen the screw (B) and release the LH footrest bracket (C) from the engine block.
Unscrew and remove the screw (A) securing the LH footrest bracket (C) to the engine.
Unscrew the screw (2) securing the side stand bracket (3) to the engine and remove the complete side stand assembly.
Disassembly of the side stand
Unscrew the retaining screw (4) and remove the side stand switch (5).
Release the side stand springs (6) and (7) from the connecting plate (8) of the side stand bracket (3) and remove them.
Unscrew the pivot screw (9) securing the side stand to the bracket and remove the side stand (1) and the nut (10).
Inspecting the side stand
Fit the side stand leg to the bracket and check that there is no excessive clearance. Ensure that the ends of the side stand
are not bent with respect to the shank. A side stand which shows signs of cracking must be renewed immediately.
To check the switch (5) refer to Sect. 6 - 6, Checking protection and safety device components.
Reassembling of the side stand