Disassembly Of Gear Interlock Plunger And Pawl Assembly - Ducati Monster 796 Workshop Manual

Gearbox assembly: gearchange mechanism

Disassembly of gear interlock plunger and pawl assembly

Operations
Drain the engine oil
Disconnect the oil pressure
sensor
Remove the clutch cover
Remove the clutch assembly
Remove the oil pump
Remove the clutch drum
Unscrew the interlock plunger screw (5) and remove the seal (6), the spring (7) and the detent ball (8).
Section reference
4 - 3, Changing the engine oil and filter
cartridge
6 - 5, Checking the indicating devices
9 - 6.2, Removal of the clutch cover
9 - 6.1, Removal of the APTC clutch
9 - 2.1, Removal of the oil pump
9 - 6.3, Removal of the primary drive
gear