Removal Of The Camshafts - Ducati Monster 796 Workshop Manual

Cylinder head assemblies: camshafts
Refit the seat

Removal of the camshafts

Operations
Remove the seat
Remove the tank covers
Remove the fuel tank
Remove the horizontal cylinder
exhaust pipe
Remove the side timing belt covers 9 - 4.2,
Remove the timing belts and
camshaft timing belt pulleys on the
heads
Remove the side covers
Note
This operation can be carried out with the rocker arms installed in the cylinder head. For clarity, the photos show the
cylinder head with the opening rocker arm removed.
Remove the key (15) from the camshaft.
Note
To prevent possible damage to components, turn the camshaft (16) through a series of rotations so that the cams do not
foul the rockers.
Note
When rocker arms are in place, the procedure is easier if you remove the clip (A) from opening rocker arm (B).
Withdraw the cylinder head camshaft (16) from its housing.
Remove the sealing ring (3) from the cylinder head.
5 - 3, Refitting the seat
Section reference
5 - 3, Removal of the seat
5 - 2, Removal of the fuel tank
fairings
8 - 2, Removal of the fuel tank
8 - 8, Removal of the exhaust
system
Removal of the timing belt
covers
9 - 4.2, Removal of the timing
system assembly
9 - 4.3, Removal of the side covers