Rear swingarm
Any abnormal movement is a sign of worn bearings that could cause instability when riding.
To check the free play of the support bearings, refer to Sect. 7 - 1,
Overhauling the front wheel
bearings.
Once the play in the swingarm bearings has been checked, the swingarm (4) may be removed from the motorcycle.
Undo and remove the screws (9) to remove the upper chain slider (7) from the swingarm (4).
Hold nut (16) and tighten the screw (15) on swingarm pivot right-hand side.
Remove the swingarm pivot (1) using a suitable tool, keeping the shimming washers (22) on either side of the swingarm.