Table of Contents
Advertisement
Electric starting system
rotate freely and at high speed. Take care not to short-circuit the two cables connected to the battery.
Removal of the starter motor
Operations
Drain the engine oil
Remove the gearchange control
Remove the clutch transmission
unit
Undo the screws (D) and remove the sprocket cover (C).
Remove the generator cover (Sect. 9 - 8,
Undo the nut (A).
Disconnect the starter motor/solenoid cable (3) (see table in paragraph
Unscrew the retaining screws (1).
Section reference
4 - 3,
Changing the engine oil and
filter cartridge
7 - 9,
Removal of the gearchange
control
7 - 8.2,
Removal of the clutch
transmission unit
Removal of the generator
cover).
"Routing of wiring on
frame", Sect. 6 - 1).
Advertisement
Chapters
Table of Contents
