Table of Contents
Advertisement
Instruments
LAP Memory display
Displays the data saved using the LAP function: lap number and time.
To display the saved lap times, enter the menu and select the "LAP MEM" page.
Holding switch (1) pressed in position B "t" in this menu page accesses the "1st lap" view mode. The display will show the
lap number, lap time, MAX speed and the MAX rpm reached for the lap in question.
Press switch (1) in position B "t" repeatedly to scroll through the 30 laps stored until returning to the 1 st lap.
If you press switch (1) in position B "t" for 3 seconds while the saved times are displayed, the display immediately resets
all the saved times; in this case, if the LAP function was active, it is switched off automatically.
The MAX speed saved is the maximum speed indicated on the display in Lap function.
To exit display of the lap times memory press switch (1) in position A "s".
If no lap times are saved in memory, all 30 lap times will be displayed as "0.00.00".
Advertisement
Chapters
Table of Contents
