Ducati Monster 796 Workshop Manual page 419

Footrest brackets
Refit the brake master cylinder (E) tightening the screws (F) to a torque of 23 Nm ±10% (Sect. 3 - 3, Frame torque
settings). Position the rear brake sensor (H) of main wiring harness onto plate (8) with copper washer (M) in-between.
Insert the rear brake pushrod (G) in the rear brake master cylinder (E).
Fix the footrest brackets (8) and (15) to the swingarm with the screws (3), suitably lubricated, with the washers (17),
and to the engine with screws (11) and (18). Tighten the screws (3) to a torque of 55 Nm ±5% and the screws (11) and
(18) to a torque of 36 Nm ±10% (Sect. 3 - 3, Frame torque settings) in the mentioned sequence.