Table of Contents
Advertisement
Front brake control
Operations
Fill the brake circuit
Refit the rear-view mirrors
Maintenance operations
Warning
Brake fluid is corrosive and will damage paintwork. Avoid contact with eyes and skin. In case of accidental contact, wash
the affected area with abundant running water and consult a doctor if necessary.
For all the maintenance operations (wear check and replacement of brake pads and brake fluids, etc.) see Sect. 4 - 3,
Maintenance operations.
Removal of the front brake system
Operations
Draining the braking circuit
Note
For the ABS front braking system, also refer to Sect. 7 - 5,
components, Sect. 7 - 7,
Unscrew the special screw (15) securing the brake hose to the master cylinder and recover the sealing washers (12);
slide hose (14) out of front master cylinder.
Loosen screw (C) to remove front brake hose (24) and the ABS sensor cable (A) from hose clip (B).
Section reference
4 - 3,
Filling the brake system with
fluid
5 - 1,
Refitting the rear-view mirrors
Section reference
4 - 3,
Draining the brake circuit
ABS components
maintenance.
ABS system operating
information, Sect. 7 - 6,
System
Advertisement
Chapters
Table of Contents
