Ducati Monster 796 Workshop Manual page 278

Diagnostic instruments
Apply the recommended threadlocker to the screw (4).
Secure the tank to the subframe with the screw (4) and the washer (3).
Tighten the screw (4) to a torque of 10 Nm ±10% (Sect. 3 - 3, Frame torque settings), using a 5 mm Allen wrench to
counterhold the threaded insert (12) located on the upper part of the tank.
Important
The threaded insert (12) is not present in the USA version.
Refit the tank covers (Sect. 5 - 2, Refitting the fuel tank fairings).
Refit the seat inserting the front ends of the seat base into the tabs on the tank, then push the rear end of the seat until
you hear the screw in the lock click into place.
Immobilizer override procedure