Refitting The Fuel Tank Fairings - Ducati Monster 796 Workshop Manual

Hide thumbs Also See for Monster 796:

Table of Contents

Unscrew the special screws (9) and remove the rear tank cover (5).

Refitting the fuel tank fairings

Locate the rear cover (5) on the fuel tank and secure it in place with the special screws (9).

Tighten the two upper special screws (9) to a torque of 2 Nm ±10% (Sect. 3 - 3,

Frame torque

Check that the four bushes (6) are installed on the front tank cover (3) with the larger diameter side facing upwards and

the six spacers (14) as shown.

Table of Contents