Table of Contents
Advertisement
Battery charging system
Refit the remaining parts in the reverse order with respect to disassembly.
Battery support
Remove the battery, as previously described in the paragraph "Battery" of this section.
Remove the vertical head coil as described in Sect. 6 - 12, Coil.
Unscrew the screws (7) and screw (5) and remove the battery support from the airbox.
Recover the bushes on the screws (7).
±
Reassemble the components in the reverse order of the disassembling, tighten the screws (7) to a torque of 5 Nm
10%
±
and the screw (5) to a torque of 10 Nm
10% (Sect. 3 - 3,
Frame torque
settings).
Alternator
It is equipped with a 12 V, 520 W alternator, consisting of a stator (A) located in the generator cover and a rotor (B)
fixed to the crankshaft.
Advertisement
Chapters
Table of Contents
