SSANGYONG Y200 Manual page 500

1E-26 ENGINE ELECTRICAL
3. Inspect the rectifier.
•
Positive rectifier test :
Inspect the open circuit for stator coil lead
terminals using the ohmmeter (1). Replace the
rectifier if necessary.
YAD1E590
•
Negative rectifier test:
Inspect the open circuit for stator coil lead
terminals using the ohmmeter (2). Replace the
rectifier if necessary.
YAD1E600
4. Inspect trio diodes.
•
Inspect the open circuit for trio diodes using
the ohmmeter (1).
•
Replace the heat sink if necessary (a).
YAD1E610
5. Inspect the brush wear.
•
If the brush wear exceeds the specified valve
(a), replace the brush.
Application
Brushes
wear
YAD1E620
Standard Limit
18.5 (0.73) 13.5 (0.53)
SSANGYONG Y200