Traction Control System (Tcs) - SSANGYONG Y200 Manual

Failure
Description
Code
TCS input signal short
150
circuit to battery
TCS input signal short
circuit to ground or
151
open
Circuit Description
Battery voltage is supplied to the TCS warning lamp with the ignition in ON and START. The warning lamp can be
activated only by the Electrical Brake Control Module (EBCM) internally supplying ground to terminal 21. If the
TCS input circuit is open or short, this failure code will be set.
SSANGYONG Y200

TRACTION CONTROL SYSTEM (TCS)

Trouble Area
TCS short circuit to power
TCS short circuit to ground or
open
M162 ENGINE CONTROLS 1F1-65
Maintenance Hint
•
Inspection the Engine Control Module
(ECM) pin 45 about short circuit or open
with bad contact
•
Inspection the TCS lamp of I/P cluster.
•
Inspection the ECM
YAD1F540