SSANGYONG Y200 Manual page 497

SSANGYONG Y200
Disassembly Procedure
1. Remove the generator. Refer to "Generator" in this
section.
2. Remove the front bracket and rear bracket.
•
Remove the through-bolts (1).
YAD1E470
•
Pry front bracket downwards using a
screwdriver (2).
•
Separate the front bracket and rear bracket (3).
YAD1E480
3. Remove the pulley and rotor assembly from the
front bracket.
•
Cover the rotor with the cloth (1).
•
Place the pulley upwards and vice the rotor (2).
•
Remove the pulley nut (3).
•
Remove the pulley (4).
YAD1E490
4. Remove the front bracket, rotor and collar.
•
Remove the collar (large) (1).
•
Remove the rotor from the front bracket (2).
•
Remove the collar (small) from the rotor shaft
(3).
YAD1E500
ENGINE ELECTRICAL 1E-23