Repair Instructions; On-Vehicle Service; Coolant Drain And Fill - SSANGYONG Y200 Manual

Hide thumbs Also See for Y200:

Table of Contents

1D-8 ENGINE COOLING

REPAIR INSTRUCTIONS

COOLANT DRAIN AND FILL UP

Draining & Filling up Procedure (Gasoline

1. Loosen the cap a little and release pressure and

remove the cap.

Notice: For the risk of scalding, the cap must not

be opened unless the coolant temperature is below

90 °C (194 °F).

2. Loosen the radiator lower drain cock and drain the

Notice: Collect coolant by using a proper

3. Drain the coolant from the crankcase by inserting

a hose (dia. 14 mm) onto the drain bolt on the

side of crankcase (exhaust manifold) and by

loosening the plug.

Just loosen the drain plug to drain the coolant

and do not remove the plug completely.

Collect coolant by using proper container.

4. After complete draining of the coolant, remove the

hose connector to drain plug and reinstall the drain

Installation Notice

Tightening Torque

5. Tighten the radiator lower drain cock.

30 N•m (22 lb-ft)

SSANGYONG Y200

Table of Contents