Subaru Impreza 2002 Service Manual page 3276

DISPOSAL OF AIRBAG MODULE (DEPLOYING AFTER REMOVAL FROM VEHI-
6) Connect the deployment tool and adapter A (de-
ployment) (B).
CAUTION:
The deployment tool should be kept shorted
until just before deployment of the airbag mod-
ule.
(A) Deployment tool: (Part No. 98299PA030)
(B) Adapter A (deployment): (Part No.
98299FC030)
7) Connect the adapter A (deployment) connector
(2D) to airbag module.
8) Install the airbag module with pad side facing up-
ward on 14 inch or greater size wheel with tire.
9) Put three tires without a wheel on the tire in-
stalled with the airbag module. Put on an additional
tire with a wheel on top, and then fasten them tight
with a rope.
CLE)
10) Move the battery at least 5 m (16 ft) from vehi-
cle, and secure the nearby area. Connect the de-
ployment tool alligator clip to the battery negative
(−) terminal.
11) Connect the other cable of the deployment tool
to the battery positive (+) terminal. Then, deploy the
S5M0309B
airbag module.
CAUTION:
• After deployment, the airbag module will be
especially hot. Leave it unattended for 40 min-
utes, and then discard it.
• Do not let water get on the deployed airbag
module.
G5M0613
12) Wrap the deployed airbag module in an airtight
vinyl bag, and discard it.
G5M0536
AB-25
AIRBAG SYSTEM
G5M0537
G5M0531
G5M0532