Subaru Impreza 2002 Service Manual page 3610

B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag the harness.
NOTE:
• Make sure to connect the harness connector.
• When installing the drain tube, insert it securely
onto drain pipe.
Length A:
15 mm (0.59 in) or more
C: DISASSEMBLY
1) Remove the sunroof frame.
2) Remove the rail stoppers (A).
( A )
3) Pull out the sunshade (A) from sunroof frame.
( A )
D: ASSEMBLY
Assemble in the reverse order of disassembly.
SUNROOF ASSEMBLY
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
E: INSPECTION
1. CHECK FOR MOVEMENT OF SUN-
SHADE
1) Place a cloth on sunshade, and attach a spring
scale to sunshade edge using a cloth.
2) Pull the spring scale to measure force required
to move the sunshade.
Force required to move rear sunshade:
Less than 24.5 ± ± ± ± 4.9 N (2.5 ± ± ± ± 0.5 kgf, 55 ± ± ± ± 1.1 lb)
G5M0205
NOTE:
Considerable force is required to start sunshade
moving, so take a scale reading when it begins to
move smoothly.
3) If the force required exceeds specifications,
check the following points:
Sunroof lid, sunshade and guide rail assembly for
improper installation.
BO0317
BO0318
SR-7
B5M0317