Subaru Impreza 2002 Service Manual page 3275

Hide thumbs Also See for Impreza 2002:

Table of Contents

DISPOSAL OF AIRBAG MODULE (DEPLOYING AFTER REMOVAL FROM VEHI-

AIRBAG SYSTEM

10) Put three tires without a wheel on the tire in-

stalled with the airbag module. Put on an additional

tire with a wheel, and then fasten them tight with a

11) Move the battery at least 5 m (16 ft) from vehi-

cle, and secure the nearby area. Connect the de-

ployment tool alligator clip to the battery negative

(−) terminal.

12) Connect the other cable of the deployment tool

to the battery positive (+) terminal. Then, deploy the

airbag module.

• After deployment, the airbag module will be

especially hot. Leave it unattended for 40 min-

utes, and then discard it.

• Do not let water get on the deployed airbag

13) Wrap the deployed airbag module in an airtight

vinyl bag, and discard it.

2. AIRBAG MODULE (PASSENGER)

1) Turn the ignition switch to OFF.

2) Disconnect the ground cable from battery, and

wait for at least 20 seconds before starting work.

3) Remove the airbag module. <Ref. to AB-13,

Passenger's Airbag Module.>

4) Bundle three wire automotive harnesses [each

with a sectional area of 1.25 mm

more], and route them through the airbag module

bracket (A). Then, twist them for added strength.

5) Short the terminal to alligator clip furnished as

deployment tool (A).

(0.00194 sq in) or

Show Quick Links

Chapters

Table of Contents