Subaru Impreza 2002 Service Manual page 3559

FRONT DOOR LATCH ASSEMBLY
SECURITY AND LOCKS
6. Front Door Latch Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the front door trim. <Ref. to EI-36, RE-
MOVAL, Front Door Trim.>
3) Remove the sealing cover. <Ref. to EB-14, RE-
MOVAL, Front Sealing Cover.>
4) Remove the front inner remote. <Ref. to SL-18,
REMOVAL, Front Inner Remote.>
5) Remove the three screws and bolt.
BO0105
6) Disconnect the connector. Remove the front
door latch assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-20