Subaru Impreza 2002 Service Manual page 3420

2. RESIN TYPE
A
1) Insert the wiper rubber through the claw (B).
A
2) Insert the wiper rubber top until it protrudes
about 20 mm (0.79 in) from the stopper (D).
20mm ( 0.79 in. )
WIPER BLADE
B
B
BO0198
D
BO0199
WW-11
WIPER AND WASHER SYSTEMS
C
3) Insert the wiper rubber into the claw (A).
A
E: INSPECTION
1) When the wiper does not perform well, inspect
the following:
• Make sure the movable part of the blade assem-
bly moves smoothly.
• Make sure the wiper rubber is not deformed or
damaged.
2) Replace with a new part if damage is found.
D
BO0197
BO0200