Subaru Impreza 2002 Service Manual page 3419

WIPER AND WASHER SYSTEMS
4. Wiper Blade
A: REMOVAL
While pushing the locking clip (A) up, pull out the
blade from arm to arrow direction.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Confirm that the clip is locked securely.
C:
DISASSEMBLY
1. METAL TYPE
Pull on side (A) of the wiper rubber stopper and re-
move the rubber from the blade assembly.
2. RESIN TYPE
Pull the wiper rubber top slightly from the stopper
and pull out fully.
Stopper
WIPER BLADE
D: ASSEMBLY
1. METAL TYPE
1) Insert the wiper rubber onto the blade so that the
stopper is in the position shown.
B6M1536A
2) Make sure the wiper rubber is securely fastened
to the pull stopper (A).
B6M1496A
BO0196
WW-10
B6M1497
B6M1498A