REAR SPOILER
EXTERIOR/INTERIOR TRIM
10.Rear Spoiler
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Open the trunk lid.
3) Remove the electrical connector (A) of high-
mounted stop light.
4) Loosen the mounting nut of rear spoiler to re-
move rear spoiler.
CAUTION:
• When removing the nut, do not drop it into
trunk lid.
• Pay attention to avoid damage during remov-
al or installation.
BO0083
B: INSTALLATION
1) Install in the reverse order of removal.
2) Clean the mounting surfaces of trunk lid and
spoiler before installation.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.46 ft-lb)
EI-34