NOISE SUPPRESSOR
ENTERTAINMENT
10.Noise Suppressor
A: REMOVAL
1. SEDAN
1) Disconnect the ground cable from battery.
2) Remove the rear pillar upper trim. <Ref. to EI-46,
SEDAN, REMOVAL, Rear Quarter Trim.>
3) Remove the rear shelf trim. <Ref. to EI-51, RE-
MOVAL, Rear Shelf Trim.>
4) Disconnect the feeder cord connector from an-
tenna amplifier.
5) Disconnect the harness connector of noise sup-
pressor from terminal on glass antenna.
6) Remove the harness clip.
7) Remove the mounting nut and detach noise sup-
pressor.
BO0507
2. WAGON
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-50, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the connector from noise suppres-
sor.
4) Remove the mounting nut and detach noise sup-
pressor.
B: INSTALLATION
Install in the reverse order of removal.
ET-11