Subaru Impreza 2002 Service Manual page 3745

WIRING SYSTEM
C: HOW TO READ WIRING DIAGRAMS
1. WIRING DIAGRAM
The wiring diagram of each system is illustrated so that you can understand the path through which electric
current flows from battery.
Sketches and codes are used in the diagrams. They should read as follows:
• Each connector and its terminal position are indicated by a sketch of the connector in a disconnected state
which is viewed from front.
• The number of poles or pins, presence of a lock, and pin number of each terminal are indicated in the
sketch of each connector. In the sketch, the highest pole number refers to the number of poles which con-
nector has. For example, the sketch of connector shown in the figure indicates the connector has 9 poles.
Connector used in vehicle
G6M0194
G6M0195
BASIC DIAGNOSTICS PROCEDURE
G6M0193
Sketch
G6M0196
G6M0197
WI-6
Connector shown in wiring diagram
Symbol
G6M0198
Number of poles
Numbered in order from upper
right to lower left.
Numbered in order from upper
left to lower right.