Subaru Impreza 2002 Service Manual page 3373

SEAT BELT SYSTEM
B: INSTALLATION
1. OUTER BELT SIDE (SEDAN)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
2. OUTER BELT CENTER (SEDAN)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
3. INNER BELT (SEDAN)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
4. OUTER BELT SIDE (WAGON)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
5. OUTER BELT CENTER (WAGON)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
6. INNER BELT (WAGON)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
REAR SEAT BELT
C: INSPECTION
1. OUTER BELT SIDE (SEDAN)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. OUTER BELT CENTER (SEDAN)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
3. INNER BELT (SEDAN)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
4. OUTER BELT SIDE (WAGON)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
5. OUTER BELT CENTER (WAGON)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
6. INNER BELT (WAGON)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
SB-12