SEAT BELT SYSTEM
3. Front Seat Belt
A: REMOVAL
1. OUTER BELT (FRONT)
1) Fold backrest all the way forward, and then
move front seat all the way forward.
2) Turn the ignition switch to OFF, disconnect the
ground cable from battery, and wait for more than
20 seconds before starting work.
3) Remove the center pillar lower trim. <Ref. to EI-
45, REMOVAL, Lower Inner Trim.>
4) Remove the anchor cover. Loosen the shoulder
anchor bolt, and then detach the shoulder anchor
from center pillar.
5) Turn over the floor mat to remove the bolts.
6) Disconnect the yellow connector of pretensioner
harness, and remove the outer belt (front).
CAUTION:
• Do not drop or apply any impact to the pre-
tensioner.
• Pretensioner and bracket should be treated
as an assembly. Do not attempt to disassemble
it.
FRONT SEAT BELT
2. INNER BELT (FRONT)
1) Disconnect the connector.
2) Remove the anchor bolt, and then detach the in-
ner belt.
B5M1070
RE0003
SB-8
S5M0234