Subaru Impreza 2002 Service Manual page 3586

READ DIAGNOSTIC TROUBLE CODE (DTC)
IMMOBILIZER (DIAGNOSTICS)
6. Read Diagnostic Trouble Code (DTC)
A: OPERATION
1) On the «Main Menu» display screen, select the {Each System Check}, and then press the [YES] key.
2) On the «System Selection Menu» display screen, select the {Engine Control System}, and then press the
[YES] key.
3) Press the [YES] key after displayed information of engine type.
4) On the «Engine Diagnosis» display screen, select the {Diagnostic Code(s) Display}, and then press the
[YES] key.
5) On the «Diagnostic Code(s) Display» display screen, select the {Current Diagnostic Code(s)} or {History
Diagnostic Code(s)}, and then press the [YES] key.
NOTE:
• For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
• For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC). <Ref.
to IM-16, LIST, List of Diagnostic Trouble Code (DTC).>
IM-9