Subaru Impreza 2002 Service Manual page 2801

ABS (DIAGNOSTICS)
9. Clear Memory Mode
A: OPERATION
1. WITHOUT SUBARU SELECT MONITOR
1) After calling up a DTC, disconnect the diagnosis
connector terminal 6 from diagnosis terminal.
2) Repeat 3 times within approx. 12 seconds; connecting and disconnecting terminal 6 and diagnosis termi-
nal for at least 0.2 seconds each time.
Diagnostic trouble code (DTC) indicatione mode
ABS warning lamp
Terminal 8
NOTE:
After the diagnostics is completed, make sure to clear memory. Make sure only start code (11) is shown after
memory is cleared.
2. WITH SUBARU SELECT MONITOR
Refer to SUBARU SELECT MONITOR for information about how to clear DTC. <Ref. to ABS-18, Subaru Se-
lect Monitor.>
CLEAR MEMORY MODE
Memory erase mode
GND(Low level)
(2)
(1) Diagnosis connector
(2) Diagnosis terminal
(3) Terminal 3
(4) Terminal 6
0.2 sec 0.2 sec or more
or more
12 sec or less
ABS-22
(1)
(3) (4)
GND open (High level)
1.5 sec
BR0110
BR0082