Subaru Impreza 2002 Service Manual page 3026

Hide thumbs Also See for Impreza 2002:

Table of Contents

3. AT MODEL AND RHD MT MODEL

1) Remove the brake switch.

2) Unbolt, and then remove the brake pedal.

3) Remove the bushing, spacer and spring.

(3) Brake pedal

(4) Brake pedal spring

4) Remove the brake pedal pad.

1) Attach the stop light switch, etc. to pedal bracket

temporarily.

2) Clean the inside of bores of clutch pedal and

brake pedal, apply grease, and set the bushings

3) Align bores of the pedal bracket, clutch pedal

and brake pedal, attach the brake pedal return

spring and clutch pedal effort reducing spring (ve-

hicle with hill holder), and then install the pedal bolt.

Clean up the inside of bushings and apply grease

before installing spacer.

Tightening torque:

T: 29 N·m (3.0 kgf-m, 21.7 ft-lb)

4) Set the brake pedal position by adjusting posi-

tion of stop light switch.

Pedal position: L

125.9 mm (4.96 in)

Tightening torque:

T: 8 N·m (0.8 kgf-m, 5.8 ft-lb)

Show Quick Links

Chapters

Table of Contents