AIRBAG SYSTEM (DIAGNOSTICS)
6. Airbag Connector
A: OPERATION
1. POWER SUPPLY
1) How to disconnect:
(1) Move the slide lock (A) in the direction of the
arrow.
(2) Pull the female connector in the direction of
the arrow with slide lock (A) moved.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
2) How to connect:
Holding the connector (A), and push it in carefully
until a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
AIRBAG CONNECTOR
2. DRIVER'S AIRBAG, PASSENGER'S AIR-
BAG, AND SIDE AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With lock arm (A) pushed in, move the slide
lock (B) in the direction of the arrow.
(3) With slide lock (B) pulled, remove the lock
arm (A) to its original position, and then pull in
the direction of the arrow and separate the con-
RE0012
nector.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
2) How to connect:
RE0013
Holding the connector, and push it in carefully until
a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
AB-26
B5M1153A
B5M1154
B5M1155