8. Inhibitor Switch
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from inhibitor switch,
and then remove the switch. <Ref. to AT-29, RE-
MOVAL, Inhibitor Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the inhibitor switch resistance.
Selector lever
Terminal No.
position
P
N
7 and 12
Except P and N
If NG, replace the inhibitor switch.
INHIBITOR SWITCH
B6M1530
Standard
Less than 1 Ω
Less than 1 Ω
More than 1 M Ω
CC-9
CRUISE CONTROL SYSTEM