Subaru Impreza 2002 Service Manual page 3514

Step
8 CHECK HARNESS BETWEEN FUEL LEVEL
SENSOR AND COMBINATION METER.
1)Disconnect the connector from combination
meter.
2)Measure the resistance between fuel level
sensor harness connector terminal and combi-
nation meter harness connector terminal.
Connector & terminal
(R58) No. 3 — (i12) No. 2:
9 CHECK FUEL LEVEL SENSOR GROUND
CIRCUIT.
Measure the resistance between fuel level
sensor harness connector terminal and chas-
sis ground.
Connector & terminal
(R58) No. 5 — Chassis ground:
COMBINATION METER SYSTEM
Is the resistance less than 10
Ω?
Is the resistance less than 10
Ω?
IDI-11
INSTRUMENTATION/DRIVER INFO
Check
Go to step 9.
Check the fuel
gauge. <Ref. to
IDI-19, Removal.>
Yes No
Repair the wiring
harness.
Repair the wiring
harness.