Subaru Impreza 2002 Service Manual page 3104

D: ASSEMBLY
Specified steering grease:
VALIANT GREASE M2 (Part No. 003608001)
1) Apply grease inside and outside of the oil seal
and press in using the ST and press.
ST 34199AE130 GEARBOX OIL SEAL IN-
STALLER
CAUTION:
Pay attention to the oil seal direction, and at-
taching position.
Be careful no to scratch the gearbox inside sur-
face.
(1) Oil seal
2) Attach the steering body to ST as shown in the
figure. Apply a coat of grease to needle bearing.
ST 926200000 STAND
CAUTION:
• Use the ST to support steering body.
• Ensure the needle bearing is free from de-
fects. If it is faulty, replace the steering body
with a new one.
NOTE:
If the steering body is removed from vehicle, be
sure to remove rust and clean.
(1) Steering body
STEERING GEARBOX [RHD MODEL]
B4M2609A
S4M0426A
PS-61
POWER ASSISTED SYSTEM (POWER STEERING)
3) Using the ST·B and ST·C, attach the oil seal to
ST·A. Insert the ST·A into rack from gear side. Re-
move the oil seal from ST·A when it approaches
piston and remove STs from rack.
ST 927490000 INSTALLER; A·B·C
NOTE:
Face the oil seal in direction shown in the figure.
(1) Oil seal
(2) Rack
4) Install the back-up ring from gear side of rack.
(1) Oil seal
(2) Back-up ring
(3) Rack
S4M0427A
S4M0428A