Subaru Impreza 2002 Service Manual page 3388

10.Combination Switch (Light)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-41, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws which secure upper column
cover to lower column cover.
4) Disconnect the connector from combination
switch.
5) Remove the screws which secure switch, and
then remove the switch.
B: INSTALLATION
Install in the reverse order of removal.
COMBINATION SWITCH (LIGHT)
B6M1184
S6M0046
LI-11
C: INSPECTION
Measure the combination switch resistance.
LHD model and RHD for europe model
8 7
17 16 1514131211 10
RHD except for europe model
8 7
17 16 1514
Lighting and turn signal switch connector
Parking switch connector
1. LIGHTING SWITCH
LHD model and RHD for europe model:
Switch position Terminal No.
OFF
Tail 14 and 16
Head 13, 14 and 16
RHD except for europe model:
Switch position Terminal No.
OFF
Tail 9 and 15
Head 9, 14 and 15
2. DIMMER AND PASSING SWITCH
LHD model and RHD for europe model:
Switch position Terminal No.
Passing 7, 8 and 16
Low beam 16 and 17
High beam 7 and 16
RHD except for europe model:
Switch position Terminal No.
Passing 1, 2 and 9
Low beam 9 and 10
High beam 2 and 9
LIGHTING SYSTEM
6 5 4 3 2 1
9
6 5 4 3 2 1
131211 10 9
2 1
4 3
BO0158
Standard
— More than 1MΩ
Less than 1Ω
Less than 1Ω
Standard
— More than 1MΩ
Less than 1Ω
Less than 1Ω
Standard
Less than 1Ω
Less than 1Ω
Less than 1Ω
Standard
Less than 1Ω
Less than 1Ω
Less than 1Ω