Subaru Impreza 2002 Service Manual page 3531

SEATS
2. Front Seat
A: REMOVAL
1) Disconnect the ground cable from battery.
2) While pressing the headrest lock button, remove
the headrest.
3) Tilt forward the backrest.
4) Move the seat to full front end.
5) Remove the bolt cover at rear end of slide rail.
6) Remove the two bolts at rear side of seat rail.
7) Move the seat to full rear end.
FRONT SEAT
8) Remove the two bolts at front side of seat rail.
9) Disconnect the side airbag connector under the
seat. (Side airbag equipped vehicle)
10) Disconnect the connector of seat belt warning.
H5M0704
11) Remove the front seat from vehicle.
CAUTION:
When removing the seat from vehicle, take care
not to damage body, seat, or trim.
BO0159
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Confirm that the seat can move smoothly and
be locked securely at any position.
Tightening torque:
Refer to COMPONENT in General Descrip-
tion. <Ref. to SE-2, FRONT SEAT,
COMPONENT, General Description.>
C: DISASSEMBLY
BO0160
1. DRIVER'S SEAT
1) Remove the seat from vehicle. <Ref. to SE-6,
REMOVAL, Front Seat.>
SE-6
G5M0344
BO0161