Subaru Impreza 2002 Service Manual page 3573

IMMOBILIZER CONTROL MODULE
SECURITY AND LOCKS
20.Immobilizer Control Module
A: REMOVAL
NOTE:
The following positions for removal and installation
are for LHD models. The positions for RHD models
are symmetrically opposite.
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-41, REMOVAL, Instrument Panel Assembly.>
3) Disconnect the connector from immobilizer con-
trol module.
4) Remove the immobilizer control module.
BO0193
B: INSTALLATION
Install in the reverse order of removal.
SL-34