Subaru Impreza 2002 Service Manual page 3081

POWER ASSISTED SYSTEM (POWER STEERING)
9) Using a press remove the pinion and valve as-
sembly from valve housing.
(1) Valve assembly
(2) Valve housing
(3) Cloth
10) Using the ST and press, remove the dust seal,
oil seal and special bearing from valve housing.
ST 34099FA120 INSTALLER & REMOVER
SEAL
CAUTION:
• Do not apply force to the end surface of valve
housing.
• Do not reuse the oil seal after removal.
(1) Oil seal
(2) Special bearing
STEERING GEARBOX [LHD MODEL]
S4M0157B
S4M0159B
PS-38
11) Remove the snap ring using snap ring pliers.
CAUTION:
• Do not reuse the removed snap ring.
• Be careful not to scratch the pinion and valve
assembly.
12) Press out the bearing together with the back up
washer using pipe of I.D. 38.5 to 39.5 mm (1.516 to
1.555 in) and press.
CAUTION:
Do not reuse the removed bearing.
(1) Bearing
(2) Backing washer
(3) Oil seal
(4) Pipe
13) Remove the oil seal.
CAUTION:
Do not reuse the removed oil seal.
G4M0147
S4M0403A