Subaru Impreza 2002 Service Manual page 2987

BRAKE
B: INSTALLATION
1. 14 INCH AND 15 INCH TYPE
1) Install the support on housing.
Tightening torque:
80 N·m (8.2 kgf-m, 59 ft-lb)
CAUTION:
• Always replace the pads for both right and
left wheels at the same time. Also replace the
pad clips if they are twisted or worn.
• A wear indicator is provided on the inner disc
brake pad. If the pad wears down to such an ex-
tent that the end of wear indicator contacts disc
rotor, a squeaking sound is produced as the
wheel rotates. If this sound is heard, replace the
pad.
• When replacing the pads, replace pads of the
right and left wheels at the same time.
2) Apply thin coat of Molykote AS880N (Part No.
26298AC000) to the frictional portion between pad
and pad clip.
3) Apply thin coat of Molykote AS880N (Part No.
26298AC000) to the frictional portion between pad
and inner shim.
4) Install the pads on support.
5) Install the caliper body on support.
Tightening torque:
37 N·m (3.8 kgf-m, 27.5 ft-lb)
6) Connect the brake hose.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
CAUTION:
Replace the brake hose gaskets with new ones.
7) Bleed air from the brake system.
FRONT DISC BRAKE ASSEMBLY
B4M1169A
BR-28
2. 16 INCH TYPE
1) Install the caliper body on housing.
Tightening torque:
80 N·m (8.2 kgf-m, 59 ft-lb)
CAUTION:
• Always replace the pads for both right and
left wheels at the same time. Also replace the
pad clips if they are twisted or worn.
• A wear indicator is provided on the inner disc
brake pad. If the pad wears down to such an ex-
tent that the end of wear indicator contacts disc
rotor, a squeaking sound is produced as the
wheel rotates. If this sound is heard, replace the
pad.
2) Apply thin coat of Molykote AS880N (Part No.
26298AC000) to the frictional portion between pad
and pad inner shim.
3) Install the pads on caliper body.
4) Install the pad pins and cross spring on caliper
body.
5) Install the M clip.
6) Connect the brake hose.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
CAUTION:
Replace the brake hose gaskets with new ones.
7) Bleed air from the brake system.
BR0008