C: ADJUSTMENT
1) Using the ST, loosen the body-side bolts of up-
per and lower hinges to align the position of front
door panel longitudinally and vertically.
ST 925610000
DOOR HINGE WRENCH
2) Loosen the screw (A) and tap striker (B) using a
plastic hammer to adjust striker to align the position
of front door panel vertically and laterally at the
front end.
CAUTION:
Do not use an impact wrench. Welding area on
the striker nut plate is easily broken.
FRONT DOOR PANEL
B5M0933A
B5M0934A
EB-13
EXTERIOR BODY PANELS